BJTDLLX elektrische buitenboordmotor van 12 V met 45 lb stuwkracht – voor vissersboot of kajak
High quality: The suspension for the electric outboard motor is made of high-strength steel, ensuring that the mount is not affected by repeated removal and attachment. The electric marine drive with a pure copper motor is more durable and has a long service life.
High efficiency: the electric boat propulsion with a pure copper motor can overcome enormous water resistance to increase the travel speed and improve efficiency.
Adjustable gears: the forward gear includes five speeds, the reverse gear includes two speeds. The gears can be adjusted freely depending on the situation and your specific requirements.
Easy to operate: The propeller was developed using a multi-dimensional optimization iteration method to improve drive efficiency and reduce propeller losses. Retractable handle, The handle can be freely adjusted depending on the situation and your specific requirements.
Application: Electric outboard motor Suitable for various small water vehicles such as kayaks, canoes, sloops and inflatable boats.
Electric outboard motor, 12 V, outboard motor
Propeller version (in): 3 sheets/10.6
Nettogewicht: 9 kg
Gross weight: 10kg/22.05lbs
Package Dimensions (cm): 107x55x18cm/42.13x21.65x7.09 inch
Head size: 48cm x 14cm / 18.90in x 5.51in
Overall height: 100 cm/39.37 inch
Rod Length:70cm/27.56inch
Clip distance: 9cm/3.54inch
Length of propeller: 29 cm/11.42 inch
Handle Length: 13 cm/5.12 inch
Battery model: 12V 100AH batteries (not included)
What you get:
1 x electric ship drive.
1 x propeller.
1 x battery terminals.
1 x instruction manual in Chinese and English.
1 set of screws.
Usage:
It is suitable for various kinds of small water vehicles, such as kayaks, canoes, dinghies and inflatable boats.
Notes:
Retractable Handle: The handle can be adjusted freely depending on the situation and your special requirements.
Fastening Holder: The mounting brackets are used to secure the ship's drives and rear plates so that the drive does not fall off your boat.
Powerful battery terminals: the clamps are more durable and wear-resistant under high currents. They have good conductivity.
1. Please read the enclosed instructions (English language not guaranteed) before use. Please pay attention to the included safety instructions.
2. We can only supply CE certification, no other certification can be provided.
3. You must attach a boat motor stand or a suspension device to your boat.
4. If you set the angle of inclination of the engine, you will never keep your hands between the shaft and the fuselage of the boat, as you can injure yourself.
5. Be sure to remove the engine before removing the boat from the water. When installing or removing the motor, make sure that the battery is unclamped.
6. Do not start the engine on the shore. If you want to test the engine, it must be done in the stream.
7. Do not use the engine if water is no longer leaking out.
8. If water is no longer leaking from the engine, stop using immediately and check whether the pump wheel or the water outlet is clogged.
9. Batteries and chargers are not included.
Pack of 10. Choose 12 V 100 Ah batteries with a maximum power of 3 hours of continuous operation. The battery is not included, please store it in a shop on site.
11. Please allow for slight colour differences due to lighting and 1-3 cm difference due to manual measurement. Please make sure you do not mind this before purchasing.
Afmetingen en specificaties
Model: ET45L
Speed Control: F5-R2
Motor Type: Brush Motor
Rated voltage: 12 V
Rated speed: 1300 rpm
Rated current: 46 A
Nominaal vermogen: 552 W
Handle: telescopic design
Maximum speed: 4-5 km/h
Geluidsniveau: 50 dB